Classic Exterior

A full gloss, semi gloss or Satin exterior paint suitable for properly prepared, Timber, masonry, concrete, block, stucco, plaster, and exterior metal.

Tartan classic exterior provides outstanding durability against even the harshest weather conditions. Advanced technology and sustainably sourced ingredients provide unparalleled performance, durability, coverage, and adhesion.

Self-priming in most situations.

Coverage:
Up to 16m2 per litre. Coverage will be lower on rough or absorbent surfaces.
 

Tartan Paints are a healthier choice for the environment, for painters and for you.  Components such as our Advanced Natural Microbiological Control, sustainably sourced additives, and Ultra Low VOC formulas (as low as 1gram per litre) provides a refined toughness and a True Colour paint film.

Surfaces must be clean, dry and free from all surface contamination. Treat mould with bleach then rinse with fresh water. Let dry then Fill in surface defects with suitable filler, putty or sealant.

• Use Tartan undercoat/sealer as a primer on woods that contain tannins (two primer coats required for heavily stained areas.

Apply coats by roller, brush or spray 

• Use high quality rollers and brushes
• Stir paint occasionally, intermixing containers of same product to ensure colour and sheen uniformity
• Fully saturate the roller, maintaining a wet edge for even finish
• Self priming on most surfaces. 

• Drying time: 30 minutes (touch dry)
• Recoat: 2 hours at 25C (allow 4 hours in cold or humid areas)
• Do not paint at temperatures below 10C
• Dry paint film is mildew resistant

Avoid exposure to steam for 72 hours. Surface may be washed after 10 days but always avoid abrasive cleaners.

Up to 16m2 per litre. Coverage will be lower on rough or absorbent surfaces.

Ensure adequate ventilation, keep floors and furniture covered. Keep the lid on containers when not in use.

Please help us to protect our environment by following these disposal instructions:

Do not pour leftover paint down the drain. Unwanted paint should be brushed out on newspaper, allowed to dry and then disposed of via domestic waste collections. Empty paint containers should be left open in a well ventilated area to dry out. When dry, recycle steel or plastic containers via domestic recycling programs (may differ between local authorities. Check with your local council first).

• Ultra Low VOC (as low as 1 gram per litre)
• Available in just about any colour
• Environmentally friendly
• Sustainably sourced additives
• Locally sourced ingredients (where possible)
• Australian made and owned

• Alkylphenol Ethoxylates
• Diuron
• Carbendazim
• Styrene
• Silica fume
• Formalin